What do you do when you need to drill a different sized hole in the same project? New people will get confused in this situation. When you have the Neiko step drill bit for metal with you, there is nothing to be worried. With a single bit of step drill, you can easily drill differently sized of holes. We hope it will be helpful for many of the metal and woodworkers. The Neiko have tried to ensure the strength of the bits. Titanium material of the bits shows us that the intention is clear they want to give their users the best drilling experience. Let’s check out how it works and how it can help a user.
Whom is this product for? / Should you buy this product?
No matter what kind of job you prefer or perform you can take the step drill bit for your help. These strong metal drill bits can easily pierce through the metal sheets. We have found the step drill bits are useful for drilling various sized holes in the metal sheet. You can also use these steps drills against any wood piece. To use these bits in your wood pieces, you need to dig a pilot hole then apply the step drill. In this way, you make the most out of a step drill bit.
Neiko 10193A Drill Bit For Metal Explained
When you find a drill, the bit is made of heavy metal Titanium you should not have any doubt about its strength and quality. Yes, it true that it might not be the best drill bit to drill every single item in the world. Many of the occasions it may fail, but it does not have the quality issue. Also, the tri flatted shank gives you the perfect grip to make sure everything is going in the right way. For drilling the hardest things, you need to get the cobalt drill bit set. This type of cobalt drill bits can easily go through the thick stainless steel which is quite mesmerizing to watch. So, now you should not have any confusion on how to drill through metal.
It’s not like this kind of stepped titanium drill bits only performs the metal or hard plastic sheet drills for you. It can also be the countersink drill bit for you. It has got the engraved size indication to give the users the perfect indication of hole size. When the drilling machine runs at speed, it becomes tough to stop at the right position, and the steps also do not resist. So, the experienced workers often use thick tapes at the required depth to have the indication to stop at the perfect depth.
Common Questions and Answers
- Question : How to restrict the bit to a required size? Answer :
Use a thick tape to indicate the required depth. The tape will help you to stop the drill machine when it reaches the expected depth.
- Question : Is the shank size also variable? Answer :
No, the shank size is fixed. You will get to see the 3/16"-1/2"(six step drill) and the 1/8"-1/2"(thirteen step drill) both have 1/4" shank. The 1/4"-3/4"(nine step drill) has a 3/8" shank.
- Question : What is the depth of each increment? Answer :
The increment is about 3/16 except the tip
- Question : Any special recommendation for using this kind of step drill bit? Answer :
These kind bits are mostly used for metal sheet.
So, your search of drill bits for metal should come to an end with this Neiko 10193 step drill bits. Now you will be able to drill holes just as the project requires with a single drill bit. These Titanium drills are best for drilling metal sheets and hard plastics. To drill the heavy metal, you will need the cobalt drill bits. Enjoy drilling variable holes with Neiko step drill bit set.