Why You Should Use a Miter Saw Table
A miter saw helps you make crosscuts, miter cuts, and angular cuts in your workpiece. The table connected to your saw is called the miter saw table that acts as a base for both the saw and the work area. In short, the miter saw table increases the utility of your saw.
There are mainly five reasons you need this essential woodworking equipment :
1. Easy to carry
You might find it a hassle to carry your miter saw around. Not only is it difficult, but your safety is also a concern. One thing you can do, you can make a custom table for your miter saw.
Nowadays, there are many portable miter saw stands that come with amazing features that can change the way you work. For example, wheeled or rolling saw stands help you roll your saw over uneven surfaces and move it from one place to another.
2. Easy to store
When you are done with your cutting operation, you will want to store it at a decent place. If the stand is larger than your workspace storage area, you will have to store it somewhere else which will become a hassle.
This is why you need a stand because with DIY stands you will not have essential features like foldable legs and the quick release system.
3. Easier to cut long materials
Some stands have extensions like the telescopic support that slides out from the end of the stand. These types of extensions can help you cut long lumber pieces. Other than that, there are heavy-duty stands that easily support long lumber, give you precise cuts, and handle the stress of lengthier timbers.
When you set up your stand on its legs, the structure becomes rock solid. This prevents any unnecessary movements that’s essential for your safety. Any movements during the operation change the cutting angle for your workpiece and you get faulty cuts.
Miter saw stands provide support to your saw and timber to make cuts with precision. The ideal stand takes the responsibility of handling the tricky angles of your timber. Also, if you are cutting several pieces, you can get more accurate and quicker cuts. This can be done by setting the cutting measure once and for the rest, it will cut according to the first measurement. Additionally, there are stoppers to help you get repeated yet precise cuts.
Miter Saw Stand - A Comprehensive Buying Guide
1. Durability & Stability
Your miter saw table should be powerful enough to withstand the test of time. If not, it won’t be able to cut heavier materials as efficiently as one with more strength. A small miter stand is unable to absorb the pressure of continuous use and could be damaged easily when you subject it to harsh weather conditions or bumps while carrying it. Since this is inevitable, you better get a heavy-duty miter saw stand.
On the other hand, stability is crucial since most stands are made of movable metal parts that are attached together. Once you set your stand up, it should stand rigidly at its place and not have any unnecessary movements when you are working. You won’t be able to position your timber accurately with an unstable stand.
The more weight capacity your miter saw stand can support, the lesser you will have to worry about working with heavy timber. Different units have different capacities, for example- BORA PM-4000 can support up to 500lb, DEWALT DWX726 300 lbs, Evolution EVOMS1 330 lbs, and so on. Your cutting needs will determine the capacity.
Miter saw stands can be divided into five groups, not counting the homemade stands -
They look as if they are straight out of the Waltons. Their construction is basic with a pair of wooden sawhorses holding each end with a wooden plank between them. They are heavy and hard to move around. In fact, they can only be kept in one fixed place.
These types are popular as you can attach different tools with their rails. There are usually four metal pull-out legs that come out of a horizontal rail. They may look flimsy but they come with attachments like clamped crossbars that are attached to any place on the rail. This makes them more versatile because you can attach any type of saw.
Also, you can combine rail stands with other types of stands to get more work done. Not to mention they have slide-out extensions too that facilitate extra space.
Tabletop stands have a flat surface just like a tabletop where you can mount your miter saw. Similar to the rail miter stands, they are flexible and can be used with different saws of different sizes.
They are not so portable since the saw has to be mounted on top of the table and you have to place it on your workshop bench; so, make sure you already have an existing bench.
- Wheeled one-hand folding stands
These popular stands are convenient for both DIY and professional work. When not in use, you can fold your stand and save space. Their one-handed design comes with a table portion with one end having supporting legs and another with a pair of wheels. They can be collapsed and folded into an upright position. Their main perk is that you can easily transport them from one place to another.
Made of metal and plank, compound stands have two horse-style pair of legs. Their strong build, light weight, easy portability, and durability make them a much-preferred option. Not only that, but they come in various styles and designs with a combination of old and new features in an optimal configuration.
Go for an easily transportable stand unless your work involves remaining in a fixed place. Wheeled one-handed stands are best to consider in this case. There are models with pneumatic wheels while some come with rubber wheels.
Pneumatic wheels are good for projects that involve moving on uneven surfaces while rubber wheels are for even terrain. You might have noticed that Bosch T4B had pneumatic wheels while Dewalt DWX726 had rubber gripped wheels.
A good weight limit is necessary to withstand heavy lumbers. If the weight of your saw is close to the average weight of your stand then any additional weight may break it or cause problems.
Get a lightweight stand if you move around a lot. Keep in mind that your miter saw has its own weight. So, if the stand is too heavy, you might find it difficult to move around.
The size of your stand is dependent on your project type and work location. Bigger models are hard to move and store. Then again, smaller stands are weak with fewer benefits.
If you are planning on cutting long timber, smaller stands will not have the material capacity to handle your project. Choose a medium-sized saw stand with extendable arms considering you want to work with both small and large timber.
Before you order a stand, check its foldable height. Some models come with collapsible legs, spring-loaded legs, leg lock levers, pin folding legs, and other types of folding features. For example, the Bora Portamate covers 31 inches by 29 inches when folded, which makes it easy to store in small workplaces.
8. Saw Compatibility
Select a stand compatible with miter saws of other brands. A universal stand allows you to use any miter saw regardless of the brand. It relieves you from the hassle of looking for a compatible saw or spending more on a new one. For example, Bosch T4B is known to have a universal mounting system which means it works with all miter saw models out there.
9. Height Adjustability
Who likes to bend for hours to work? There are miter saw stands that have adjustable height extensions to avoid this situation. Moreover, stands with an ergonomic work height can help you make accurate cuts and give more stability.
Not all stands have adjustable height settings though. Many have predetermined heights, which are generally for a person with an average height. This is not comfortable for tall or short users.
10. Additional features
If you want to fit your miter saw to the stand, you need an adaptable mounting system. There are different designs for mounting. Some are built to carry a certain type of saw while some are more adaptable. Often we see a mounting system working only with the saw of its own brand.
In this case, choose a stand that has adaptable mounting, which makes your stand compatible to work with most saw models on the market. However, if you plan to use only a certain size or a fixed type of saw then avoid mountings with restrictive fits.
If your miter saw stand has a power strip or self-power supply then it can save you a lot of time and trouble you might otherwise spend when looking for an electrical outlet. This feature makes it more portable and easy to use. Though a lot of models don’t come with this feature, POWERTEC MT4000 is exceptional in this case.
The price range is between $50 to $350. If your budget allows you then you should buy a high-capacity one, such as the Bosch T4B. The better the quality, the more versatile the stand will be.
Miter Saw stands: Usage and maintenance tips
Take good care of your miter saw setup and it will serve you well. Here are some tips to facilitate your cleaning sessions.
1. Cleaning debris and dust particles
There will be a lot of dust and debris when you’ll be using your miter saw. Wood dust left unchecked could reduce the stand’s longevity and cause rust. Excess sawdust could also become a safety hazard for you.
Clean the saw, saw parts, saw stand, and extensions on a regular basis. Use compressed air to blow away dust particles. You can also use cleaning cloth for this purpose.
2. Proper removal and storage of the saw
Carefully remove the unit when you are done. No matter whether you store the stand attached with the saw or not, clean the saw and its blade well. Apply some cutting oil on the surface of the blade. Make sure your saw is stored well so that it doesn’t gather dust nor it gets damaged.
3. Maintain the factory instruction and guideline
You must read the factory instructions and guidelines thoroughly and follow sincerely. They give you the necessary tips and directions for usage and maintenance of the saw stand.
There you have it - a list of the best miter saw stands the market has to offer today. If you read carefully, we believe by now you know which one to pick from so many options!
Share your user experience with us using the comments section below. Drillly is always eager to hear from our audience!
1. Can I leave my miter saw on the stand?
No, don’t do that. For most brands, you have to detach the unit before folding the stand. However, few expensive models may allow you to leave the saw but this is not advisable.
2. Are wheeled stands worth the extra investment?
It depends on your work requirements. If your project involves a lot of moving around then wheeled ones will be better for you. But if you work in one place all the time you don’t need to make that extra investment.
3. Could I use one of these as a permanent stand in my workshop?
It is up to you to decide how to use it. If you plan to use it as a permanent stand then you can save your money by buying the simpler ones, those without wheels or foldable legs.
4. Are miter saw stands universal?
Most miter saw stands are universal but we advise you to check the dimensions and the maximum weight capacity. You can buy the same brand of saw and stand as well.
5. What's the biggest material I can use on a miter saw stand?
Most workpieces are of 6 or 8 feet, which are okay with most stands. Depending on the brand and model some can support longer materials. Extensions are also helpful in this regard.
6. Is a miter saw stand really necessary?
You better try one to enjoy features like portability and adjustability. But you can use your existing workbench if it has enough space. <
7. Can’t I just build my own miter saw stand?
Yes, you can. However, building a miter saw stand may be time-consuming and eventually more costly than buying a new one.